How to apply a wall sticker?
Wall stickers can be applied to the wall and all other smooth surfaces very easily and simply. Just follow our instructions.
INSTRUCTIONS FOR APPLYING WALL STICKERS AND WALLPAPERS
Required tools:
A few things that will help you when applying the sticker.
Step 1:
Clean the surface with a dry cloth. The surface should be dry, and we recommend that it is not freshly painted.
Step 2:
Place the sticker on a flat surface and use a squeegee or a credit card to go over it to make sure the sticker adheres properly to the transfer foil.
Step 3:
Align the sticker and secure it to the wall in each corner using masking tape.
Step 4:
Place a piece of masking tape in the center of the sticker, then remove the masking tape from one side.
Step 5:
Peel off the transfer foil, making sure the sticker separates from the white backing paper. Then you can cut off the white backing paper.
Step 6:
Smooth the sticker by hand.
Start from the center and move outward.
Avoid creating bubbles and wrinkles.
Step 7:
Carefully go over the sticker with a squeegee so that it adheres properly to the wall and any air bubbles are removed.
Step 8:
Remove the masking tape and peel off the remaining white backing paper. Then repeat step 6.
Step 9:
Using the squeegee, firmly but carefully go over the entire sticker to ensure it is evenly applied to the wall.
Step 10:
Slowly remove the transfer foil starting from one corner. If part of the sticker sticks to the foil, press it firmly back onto the wall and continue removing the foil.
Step 11:
You can use a clean cloth to gently press out any bubbles.
To remove a bubble that won’t disappear: make a VERY small hole with a needle and press the air out.
For any additional information, please call us at 024/520 600